LTC203
ç¹ç¹
- Micropower Operation
- Single 5V or ±15V Supply Operation
- Low Charge Injection
- Low RON
- Low Leakage
- Guaranteed Break Before Make
- Latch Resistant Design
- TTL/CMOS Compatible
- Improved Second Source for DG201A/DG202
æè¿°
The LTC™201A, LTC202, and LTC203 are micropower, quad CMOS analog switches which typically dissipate only 250µW from ±15V supplies and 40µW from a single 5V supply. The switches have 65 Ohm typical on resistance and a very high off resistance. A break-before-make characteristic, inherent in these switches, prevents the shorting of two channels. With a supply voltage of ±15V, the signal range is ±15V. These switches have special charge compensation circuitry which greatly reduces charge injection to a maximum of �25pC (±15V supplies).
The LTC201A, LTC202, and LTC203 are designed for applications such as programmable gain amplifiers, analog multiplexers, sample-and-hold circuits, precision charge switching and remote switching. These three devices are differentiated by the type of switch action, as shown in the logic table.
åºç¨
- Supply Current: 1+=40µA, 1-=5µA Max.
- Charge Injection (±15V Supplies) ±25pC Max. (Single 5V Supply) 2pC Typ.
- RON65ohms Typ.
- Signal Range: ±15V